BK RACING Fuel - Product Info

Product Info

Mixture

All mixing is done using a hydrometer not by volume which guarantees exact measurement. When mixing nitro and methanol, there is a chemical reaction that will lower the temperature of the fuel at the time of mixing. This reaction will make a mixture using a volumetric measurement inaccurate. By using a corrected hydrometric measuring chart, we guarantee an absolute measurement of the nitro and methanol ratio.

	Manufacturing
	By using a Just In Time manufacturing process, we guarantee the freshest fuels that will provide the fastest lap times and the most consistent carburetor mixture settings.

Oils

We use a castor and synthetic oil mixture in BK Racing Fuel.

Only the best 100% pure AA grade castor oil.

Synthetic oil that has been time proven in two stroke go-karts and motor cycles.

All oil must prove to have the lowest acidic quantity of less than .5% to be considered for use in our fuel.

Methanol

The methanol used in our fuel is the same top quality methanol that is used in top fuel dragsters.

The source for the methanol, used in our fuel, has been producing methanol for over 20 years.

We require that all methanol be accompanied by a data sheet from the manufacturer proven to have a low water content.

We only use methanol containing less than 3 parts per million of water.

Nitro

We use only American-made Nitro products.

American Nitro products are made under the strictest quality standards compared to any other manufacturing country.

Non-Carbon

Leaves motors clean and ready to run

No use of heavy dyes or colorants

BK2

Carbon Additive

The carbon additive will fill the fine scratches
on the cylinder wall and the piston

Better compression

BK Racing Fuel | 10315 Joaquin | Dallas, Texas 75228
(214) 328-5331 \ e-mail: tprat75302@aol.com